¡€ XH-200 Polyethylene Wax
¡€ XH-202C fluoropolymer lubricant
¡€ XHDAC200 Epoxy Iron-Red Primer
¡€ XHDAC210 Modified Thick-film¡­
¡€ XHDAC221 Static-Free Coating
¡€ XHDAC301 On-Rust Epoxy Primer
¡€ XH-205High-acid oxidizedpolyethylene¡­
¡€ XHDAC312 Grease-Resistant ¡­
¡€ XHNC1010 Lotus leaf 8 in 1 ¡­
¡€ Pearl 8-in-1 Super Flexility ¡­
 
Products

XH-202C fluoropolymer lubricant
( PE wax )


Introduction:
XH-202C fluoropolymer lubricant is a new agent from national high-tech enterprises - Xianghe Special Wax Co.,Ltd, which have excellent lubrication interior and outerior, bright surface, apply to the processing of polymer modified , in particular the high viscosity of new polyolefin.
Index
Appearance£ £ £ £ £ £ £ £ £ £ £ £ £ white grain or powder
Acid value(mgKOH/g)£ £ £ £ £ £ £ £  90-100
Softening Point (¡æ)£ £ £ £ £ £ £ £ 80-95
Density (g/cm3)£ £ £ £ £ £ £ £ £ £  0.90-0.95
Chemical Characteristics:
XH-202C added(high temperature) high viscosity polymer can increase production, reduce energy consumption, eliminate melt fracture and Die Set tablets, finish surface, lower extrusion (Injection) temperature. XH-202C is a good dispersion in the polymer, which be made directly with the LLDPE and other polymer blends (or granulation),and not masterbatches. It is aslo excellent dispersion of other additives (oxygen engage agents, dyes), cleaning function, and no left on the metal surface. And it meets food health requirements, which can be widely used in food packaging blowing, film, plastic pipe of drinking water, and plastic containers for product and so on. Apart from XH-202C has good toughness, but also good electrical properties. It is good processing for high insulation of wire and cable.
Application:
XH-202C widely used as processing agent in PE, PP, PVC, ABS resin and other resin for extrusion, rolling, injection, blow molding, extrusion dies, hose, wire and cable materials, particularly high-viscosity olefins.
Dosage:
5.1 Improve polymer Processing performance, finish the surface of
polyethylene products, which add 1.0 -1.5% of resin.
5.2 1% -5%to injection while increase filling dosage,
5.3 1.5% - 2.5% into ABS and polystyrene resin to improve dispersion,
eliminate unnormal phenomenon, and inprove appearance.
5.4 0.5% -1.5% to wire and cable insulation material processing.
Package and storage
Packed in 25Kg knitted plastic bag with inner plastic bag and no danger. Keep out rain,sun and fire.

 


Copy right abserved by Auspicious Coating&Parkerizing Headquarter Custommers Service Center
Address: 49#, Chuangye Road, HI-TECH Zone, Chengdu China
Tel: 86-28-85141409 Fax: 86-28-85141409 E-mail:xhtllhchina@yahoo.cn